DRAKE OFFICE CHAIR
HARDWARE
Thank you for purchasing the Drake Office Chair. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - arm
bolts
Missing hardware?
Please call 800.606.6387 for replacements.
4 - large
bolts
TOOLS REQUIRED
small allen wrench
(included)
large allen wrench
4 - small
bolts
(included)
1 - piston 1 - leg base
5 - wheels
B
A
1 - adjustment
mechanism
1 - back
Made in China - r06 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - seat
2 - arms
(1 left, 1 right)
1 A) Insert 5 wheels into leg base as shown. Firmly
press each wheel into corresponding hole to secure.
B) Insert piston into leg base assembly as shown.
Press firmly to secure.
DRAKE OFFICE CHAIR
Install bolts in
each corner
as shown
TOP VIEW
2 Attach adjustment mechanism to bottom of seat
as shown with 4 small bolts. Secure, but do not over
tighten, bolts with an small allen wrench.
front
FRONT
BACK
small
bolt
NOTE: Do not over
tighten the bolts
SIDE VIEW
FRONT
Install bolts in
middle holes
as shown
large
bolt
TOP VIEW
BACK
SIDE VIEW
3 Attach back to adjustment mechanism as shown
with 4 large bolts. Secure bolts with an small allen
wrench.
back
A
B
NOTE: Finalize assembly by
sitting heavily on the chair a few
times. This will secure all the
component connections.
4 A) Position assembly
upright. Attach 2 arms to
assembly with 2 arm bolts
per arm as shown, using an
large allen wrench.
B) Fit hole of seat assembly
into correpsonding hole of
leg assembly as shown.
Press firmly to secure.
Assembly is now complete.
HEIGHT ADJUSTMENT
While sitting in the chair, pull the level up to
lower the seat. To raise the seat, take your
weight off the chair and pull the lever up.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Made in China - r06 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...