Crate & Barrel Drake Desk Assembly Instruction
DRAKE DESK
HARDWARE
Thank you for purchasing the Drake Desk. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
2 - metal
braces
6 - wood
dowels
4 - pads 6 - flat
Missing hardware? Please call 800.606.6387 for replacements.
3 - screws
washers
6 - bolts 2 - cam
screws
6 - spring
washers
2 - cams
TOOLS REQUIRED
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
NOTE: Do not over
tighten the cam screw
A
2 - side frames
(1 left, 1 right)
1 - desktop
assembly
Made in China - r04 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - crossbar
1 - glass
panel
B
1 A) Insert 2 cams and 2 wood dowels into crossbar as
shown. Make sure arrows on each cam points toward
nearest edge with holes.
B) Insert 1 cam screw and 2 wood dowels into left and
right side panels. Secure cam screws, but do not over
tighten, with a phillips head screwdriver.
DRAKE DESK
NOTE: Do not over
A
A
2 A) With assistance of another adult, fit dowels of left
side panel into desktop as shown. Secure with 3
bolts, 3 spring washers and 3 flat washers, using an
allen wrench. Do not over tighten the bolts.
B) Fit dowel of crossbar into left side panel as shown.
Using a screwdriver, turn cam clockwise until it
securely engages cam screw.
tighten the bolts
B
B
Make sure
hole on
crossbar is
facing up
during
assembly
A
B
3 A) Fit dowels of right side panel into desktop as
shown. Secure with 3 bolts, 3 spring washers and 3
flat washers, using an allen wrench.
B) Fit dowel of crossbar into right side panel as
shown. Secure cam.
NOTE: Do not over
tighten the screws
B
A
5 A) Adhere 4 pads to each corner of desk assembly
as shown.
B) With the assistance of another adult, carefully place
glass top onto desk assembly. Make sure glass top is
4 Attach 2 metal braces to desk assembly as shown
with 3 screws. Secure, but do not over tighten, with a
screwdriver. With the assistance of another adult,
position unit upright.
Made in China - r04 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
securely supported by pads.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer.
Loading...