Crate & Barrel Drake Bookcase Assembly Instruction

DRAKE BOOKCASE

HARDWARE

Thank you for purchasing the Drake Bookcase. This page
lists all the contents included in the box. Please take the time
to identify the hardware as well as the individual components
to this product. As you unpack and prepare for assembly,
place the contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely assemble this product.

COMPONENTS

10 - cam
screws

4 - small
screws

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

Allen wrench (included) Phillips head screwdriver

10 - cams 1 - allen bolt

20 - rubber
pads

5 - glass panels

5 - crossbars

2 - metal cross braces

1 - left side frame 1 - right side frame

Made in China - r01 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

DRAKE

BOOKCASE

Arrow on cam

points

towards end

A

Make sure

these holes

face up

B

1

Insert 10 cam screws into both side frames. Secure
each with a phillips head screwdriver but do not over
tighten.

C

B

A

2

A. Insert 1 cam into the bottom of each crossbar as
shown. Make sure arrow on cam points towards the
closest end with the dowel.
B. Fit 5 crossbars onto the right side frame, aligning
cam screws and dowels with corresponding holes.

3

A. Insert 1 cam in the other end of each crossbar.
Make sure arrow on each cam points towards the end
of the crossbar.
B. Fit left side frame onto dowels of crossbars.
C. Turn all 10 cams clockwise using a Philip head
screwdriver to secure side frames to crossbars.

Made in China - r01 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

4

Assemble the 2 metal cross braces, located in
packing foam with red ribbon. Using an allen wrench,
fasten 1 allen bolt to center of cross brace.