DELANO SIDEBOARD
HARDWARE
Thank you for purchasing the Delano Sideboard. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
18 - wood
dowels
4 - large
bolts
Missing hardware? Please call 800.606.6387 for replacements.
2 - small
bolts
2 - bolt
caps
10 - medium
bolts
16 - flat
washers
21 - screws
16 - spring
washers
TOOLS REQUIRED
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
2 - pull
screws
8 - shelf
pins
A
1 - partition 2 - back panels
2 - side panels
(1 left, 1 right)
(1 left, 1 right)
B
2 - left and
right doors
(pull pre-attached
to right door)
Made in China - r07 Page 1 of 3
2 - adjustable
shelves
(1 left, 1 right)
1 - bottom
panel
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 - legs 1 - pull
1 A) Insert 4 wood dowels into bottom panel as shown.
B) Insert 6 wood dowels into top panel as shown.
1 - top
panel
DELANO SIDEBOARD
NOTE: Make sure side
panels and partition are
oriented as shown
during assembly
A
partition
A
B
BB
top panel
2 A) Fit dowels of top panel into corresponding holes of
left and right side panels as shown. Secure each side
panel with 2 medium bolts, 2 spring washers and 2 flat
washers, using an allen wrench. Do not over tighten the
bolts.
B) Attach partition to top panel with 2 small bolts, 2
spring washers and 2 flat washers as shown.
AB
3 Insert 2 wood dowels into each leg as shown.
A
B
C
bottom
panel
C
4 A) With assistance of another adult, fit dowels of bottom
panel into corresponding holes of assembly shown, and
secure with 6 medium bolts, 6 spring washers and 6 flat
washers.
B) Fit threaded studs of partiton into corresponding holes of
bottom panel and secure with 2 bolt caps, using an allen
wrench.
NOTE: Make sure
sliding door grooves
are assembled in
front as shown
Made in China - r07 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
C) Fit dowels of each leg into bottom panel and secure with
1 large bolt, 1 spring washer and 1 flat washer, using an
allen wrench.
DELANO SIDEBOARD
right door
(top and bottom
front groove)
left back
panel
right back
panel
5 Attach left back panel to assembly with 8 screws,
and right back panel with 13 screws as shown.
Secure, but do not over tighten, with a phillips head
screwdriver.
LOCK
left door
(top and bottom
back groove)
UNLOCK
6 With the assistance of another adult, position unit
upright as shown. Locate locking mechanism behind
left door (without pull) and unlock as shown. Angle
bottom of left door into bottom back groove of
assembly, and fit top of door into top back groove.
At this point, lock door into place.
Repeat steps for remaining right door (pull
pre-attached) for top and bottom front grooves.
8 Attach pull to left door with 2 pull screws as
shown, using a screwdriver.
Assembly is now complete.
7 Slide open door and insert 4 shelf pins into each
side at desired shelf heights. Place 2 adjustable
CLEANING & CARE
shelves onto shelf pins. Make sure notch of each
shelf is assembled toward corresponding back corner.
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
Made in China - r07 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...