DELANO HIGH DINING TABLE
HARDWARE
Thank you for purchasing the Delano High Dining
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
12 - wood
dowels
6 - screw
posts
Missing hardware? Please call 800.606.6387 for replacements.
6 - barrel
nuts
12 - bolts
6 - set
screws
TOOLS REQUIRED
allen wrench (included)
flat head screwdriver
(We recommend the use of hand tools instead of power tools)
phillips head screwdriver
ASSEMBLY
2 - short
crossbars
1 - tabletop
4 - legs
(2 left, 2 right)
1 - long
crossbar
NOTE: Do not over
tighten the screw post
leg
IMPORTANT:
Make sure to align
slot of screw post
parallel to leg
1 Insert 2 wood dowels and 1 screw post into each leg
as shown. Secure screw post with a flat head
screwdriver. Important: Make sure to align slot on top of
screw post parallel to leg. Do not over tighten screw
posts.
Made in China - r07 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
DELANO HIGH DINING TABLE
NOTE: Align this hole
with holes on end of
crossbar
A
short
crossbar
Align this hole in
screw post
with hole in
top of crossbar
right leg
B
long
crossbar
2 A) Insert 2 wood dowels, 1 screw post and 2 barrel
nuts into each short crossbar as shown. Use a flat head
screwdriver to align the hole on the side of the barrel nut
with the holes on the end of the crossbar.
B) Insert 2 barrel nuts into long crossbar as shown.
long
crossbar
short
left leg
crossbar
3 Fit dowels of left and right leg into corresponding
holes of short crossbar as shown. Make sure hole in
screw posts aligns with holes of short crossbar.
4 With the assistance of another adult, fit dowels of
short crossbars into corresponding holes of long
crossbar as shown. Make sure hole in screw posts
aligns with holes of long crossbar.
Made in China - r07 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
DELANO HIGH DINING TABLE
5 Secure all barrel nuts by inserting a set screw into each
and tightening each with a phillips head screwdriver as
shown. Make sure set screw securely engages each screw
post.
CORRECTLY ASSEMBLED
SIDE VIEW DETAIL
tabletop
6 With the assistance of another adult, place tabletop
face down onto a clean, padded surface. Fit legs of
assembled unit into corresponding notches in tabletop
as shown. Secure, but do not over tighten, each leg
with 3 bolts using an allen wrench.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Do not use furniture wax or
polish as the unit is finished with a protective clear
lacquer.
Made in China - r07 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...