Crate & Barrel Delano 40 Round Dining Table Assembly Instruction

DELANO 40” ROUND DINING TABLE

HARDWARE

Thank you for purchasing the Delano 40” Round Dining
Table. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

NOTE: Do not over
tighten the bolts

12 - bolts

Missing hardware?
Please call 800.606.6387 for replacements.

12 - spring
washers

12 - flat
washers

TOOLS REQUIRED

allen wrench (included)

COMPONENTS

4 - legs

1 A) With the assistance of another adult, place tabletop
upside down onto a clean, padded surface. Fit 4 legs into
notch on tabletop as shown.
B) Secure each leg to tabletop with 3 bolts, 3 spring

washers and 3 flat washers as shown using an allen
wrench. Do not over tighten the bolts. With the assistance

of another adult, position assembled unit upright.

1 - tabletop

NOTE: Periodically check bolts and tighten as necessary.

leg

Assembly is now complete.

B

B

A

tabletop

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

DELANO 40” ROUND DINING TABLE

LEVELER ADJUSTMENT

NOTE: This table comes with pre-attached
levelers. Please do the following if your table is
not level.

leg

leveler

With the assistance of another adult, adjust
levelers of each leg as necessary.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. It is recommended to use
coasters to protect surface from heat and water.

Made in China - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com