Crate & Barrel Cubix Black Stackers, Cubix Maple Stackers, Cubix Set of Two Maple Stackers Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
CUBIX STACKER
Thank you for purchasing the Cubix Stacker. This
page lists all the contents included in the box.
Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect
them from damage.
COMPONENTS
1 - back panel
1 - top panel
1 - center panel
Label
indicates
top edge
1 - bottom panel
2 - dividers
with slot
Made in China - r04
1 - short
divider
1 - medium
divider
1 - tall divider
HARDWARE
22 - cams
22 - cam covers
Missing hardware? Please call 800.606.6387 for replacements.
22 - cam screws 39 - dowels
1 - grommet
TOOLS REQUIRED
Phillips head screwdriver
Center
Panel
A
Bottom
Panel
B
1 A. Insert 6 cam screws on 1 side of the center panel and 2
cam screws on the other side as shown. Secure each screw
with a phillips head screwdriver, but do not over tighten.
Insert 3 dowels into the holes on the edge as shown.
B. Insert 8 cam screws into the bottom panel and secure with
a screwdriver.
Page 1 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
CUBIX STACKER
A
B
Top
Panel
Tall
Divider
2 A. Insert 4 cam screws into the top panel and secure
with a screwdriver.
B. Insert 2 cam screws into the tall divider and secure
with a screwdriver. Insert 4 dowels into holes in top and
bottom edges as shown.
1 Short &
1 Medium
Divider
Divider with slot
x 2
4 A. Install 4 cams and 8 dowels into the short and
medium dividers as shown.
B. Install 4 cams and 6 dowels into each divider with
slots as shown.
Made in China - r04
A
Arrows on each
cam points towards
nearest edge
Tall
Divider
3 A. Insert 4 cams into the large holes of the tall divider.
Make sure to orient the cams as shown, so that the arrow
points towards the nearest edge.
B. Insert 2 cams into the large holes of the center panel,
making sure that arrows on cams point to nearest edge.
Labelled edge of top panel
faces up
5 Fit together top panel, medium divider, tall divider and
center panel as shown. Make sure labelled edge of tall
divider is oriented as shown.
B
Center
Panel
Page 2 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
CUBIX STACKER
x 8
Cam in
unlocked
position
Cam in
locked
position
6 Secure assembly by turning all 8 cams 90ยบ clockwise
with a phillips head screwdriver.
NOTE:
This step is for constructing Assembly Option B.
B
A
8 A. Fit together bottom panel, 1 short divider and 2
dividers with slots. Lock all 6 cams with a phillips head
screwdriver.
B. Slide back panel into slots of dividers as shown. Fit
grommet into the hole of the back panel.
Made in China - r04
NOTE:
At this point decide how you
want to configure your Cubix
units. Each unit can be
assembled in 2 different ways,
depending on how you want to
B
orient the units. See page 4 for
sample configurations and
determine which unit you want
to construct. This step is for
Assembly Option A.
A
7 A. Fit together bottom panel, 1 short divider and 2
dividers with slots. Lock all 6 cams with a phillips head
screwdriver.
B. Slide back panel into slots of dividers as shown. Fit
grommet into the hole of the back panel.
Proceed to step 9.
A
B
9 A. Fit together assembly from Step 6 and Step 7 or 8.
Secure all remaining cams with a screwdriver.
B. Conceal all exposed cams with cam covers.
Assembly is now complete.
Page 3 of 4
Customer Service 800-967-6696 | http://www.crateandbarrel.com
CUBIX STACKER
CONFIGURATION OPTIONS
two
units
Two A Assemblies
three
units
four
units
B
A
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
NOTE:
The Cubix stacking modules are not designed to be used vertically.
Made in China - r04
Two A Assemblies
Three A Assemblies Two A & One B Assemblies
B
Two A & Two B Assemblies
Two A Assemblies
B
A
Four A Assemblies
A
Page 4 of 4
Loading...