CONTOUR HUTCH
HARDWARE
Thank you for purchasing the Contour Hutch. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - cam
screws
4 - cams
1 - wall
strap
8 - wood
dowels
4 - flat
washers
1 - short
screw
4 - spring
washers
1 - long
screw
4 - long
bolts
8 - large
screws
1 - plastic
anchor
2 - connecting
brackets
14 - short
screws
2 - brackets
Missing hardware? Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
allen wrench (included)
A
side panels
2 - side panels
(1 left, 1 right)
Make arrow on
1 - back
panel
each cam points
towards nearest
edge with holes
B
shelf
1 - shelf
1 A) Insert 2 cam screws and 2 wood dowels into left and
right side panels as shown. Secure cam screws, but do not
1 - top
panel
over tighten with a phillips head screwdriver.
B) Insert 4 cams and 4 wood dowels into shelf as shown.
Make sure arrow on each cam points towards the nearest
edge with holes.
Made in China - r04 Page 1 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
CONTOUR HUTCH
2 Fit cam screws of side panels and dowels of shelf
together as shown. Turn each cam clockwise until it
securely engages each cam screw, using a phillips
head screwdriver.
3 Fit dowels of assembled unit as shown into
corresponding holes in top panel. Secure top panel
with 4 large bolts, 4 spring washers, and 4 flat
washers as shown, using the allen wrench.
hutch
media
stand
4 With the assistance of another adult, carefully place
assembled unit face down as shown. Attach back panel
to assembled unit with 14 short screws, using a
screwdriver.
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
5 With the assistance of another adult, carefully position
hutch upright and place onto media stand as shown.
Attach assembly with 2 connecting brackets with 4 large
screws per bracket. Secure all screws with a screwdriver.
CONTOUR HUTCH
6 Safety Mounting Instructions
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach 1 bracket to top of hutch as shown, using 1
small screw.
B) Determine the final location of hutch. Mark position on
the wall, approximately 2" below the bracket mounted to the
back of the cabinet.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Squeeze 2 flanges of plastic
anchor and fit into pre-drilled hole. Gently tap the plastic
anchor until the flange of the anchor is flush with the wall.
D) Attach the remaining bracket to the wall by inserting 1
large screw through the wall bracket and into the wall
anchor in the wall.
E) Place the unit so the bracket on the back edge is allowed
with the bracket on the wall.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
short
A
screw
long
D
screw
wall
F
strap
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
C
anchor
bracket
Made in China - r04 Page 3 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
CONTOUR HUTCH
7 If you purchased the complete Contour collection (media
stand, hutch, audio stand, and audio tower), please proceed
with the following instructions.
Attach 4 metal plates onto assembled unit as shown. Secure
plates with 2 short bolts as shown, using an allen wrench.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Made in China - r04 Page 4 of 4
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...