Crate & Barrel Conrad Coffee Table Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

CONRAD COFFEE TABLE

Thank you for purchasing the Conrad Coffee Table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - wood top

2 - top crossbars

2 - leg frames

Made in China - r03

HARDWARE

6 - wood screws

6 - flat washers

Missing hardware? Please call

800.606.6387 for replacements.

8 - machine screws

4 - tube caps

TOOLS REQUIRED

Allen wrench (included)

Phillips head screwdriver

x 2

1 Lay 1 leg frame face down with the tube fittings
facing up, oriented as shown. Slide 2 crossbars over tube
fittings as shown. Make sure holes in crossbars and tube
fittings are aligned and face down.
Loosely attach with 2 machine screws per crossbar. Do not
fully tighten the screws.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

CONRAD COFFEE TABLE

2 Attach remaining leg frame to assembly with 2
machine screws per crossbar, using the same method

outlined in Step 1.

A

B

x 8

4 A. With the assistance of another adult, lift assembled
unit into an upright position. Place wood top into
position. Insert 6 wood screws and 6 washers through
each metal tab on the crossbars and secure with a
phillips head screwdriver.
B. Fully tighten 8 machine screws installed in Steps 1-2
with the allen wrench. Assembly is now complete.

Made in China - r03

3 Insert 1 plastic tube cap onto bottom of each leg. If
necessary, gently tap into place with a hammer.

CARE & CLEANING

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Page 2 of 2