Crate & Barrel Commercial Laundry Center Assembly Instruction
COMMERCIAL LAUNDRY SORTER
HARDWARE
Thank you for purchasing the Commercial Laundry
Sorter. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
8 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench (included)
4 - spacers
COMPONENTS
1 - bottom
frame
1 - laundry bag 2 - side frames
(1 left, 1 right)
2 - partitions 2 - uprights1 - top frame
2 - wheels
1 - hanging bar
2 - locking
wheels
4 - bumpers
Made in Taiwan - r01 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
COMMERCIAL LAUNDRY SORTER
NOTE: Do not over
tighten the bolts
left side
left and right
side frames
wheel
frame
spacer
top frame
bumper
locking
wheel
NOTE: Make sure locking
wheel faces front as shown
1 Attach 2 bumpers, 1 wheel and 1 locking wheel to
left and right side frames as shown. Turn each wheel
clockwise to secure. Make sure locking wheel is installed
at front as shown.
A
upright
upright
B
hangbar
bottom frame
right side
frame
2 Attach top and bottom frame to left and right side
frames with 4 bolts and 4 spacers per side as shown.
Secure, but do not over tighten, the bolts using a phillips
head screwdriver.
3 A) Fit 2 uprights into left and right side frames
as shown. Make sure pin of each upright securely
engages corresponding holes of left and right side
frames.
B) Fit uprights into hangbar as shown. Make sure pin
of each upright securely engages corresponding
holes of hangbar.
Made in Taiwan - r01 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...