COLFAX MEDIA STAND
HARDWARE
Thank you for purchasing the Colfax Media Stand. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
6 - bolts 18 - cam
screws
8 - shelf
pins
18 - cam
covers
20 - wood
dowels
Missing hardware? Please call
800.606.6387 for replacements.
WALL MOUNTING HARDWARE
1 - wall
strap
1 - wall
screw
TOOLS REQUIRED
phillips head screwdriverallen wrench (included)
(We recommend the use of hand tools instead power tools)
NOTE: Do not over
tighten the cam screws
top
A
panel
18 - cams
1 - top panel
2 - side panels
(1 left, 1 right)
1 - door front
Made in China - r04 Page 1 of 4
1 - back panel
1 - large shelf
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - bottom panel
1 - partition
1 - small shelf
bottom
panel
B
1 A) Insert 8 wood dowels and 10 cam screws into top
panel as shown. Secure, but do not over tighten, cam
screws using a phillips head screwdriver.
B) Insert 8 wood dowels and 4 cam screws into bottom
panel as shown.
COLFAX MEDIA STAND
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
right side
panel
2 A) Insert 3 cams into right side panel as shown. Make
sure arrows on each cam point toward nearest edge with
holes.
B) Insert 2 wood dowels, 2 cam screws and 3 cams into
left side panel as shown.
A
B
left side
panel
A
partition
B
back panel
3 A) Insert 6 cams into partition as shown.
B) Insert 2 wood dowels, 2 cam screws and 6 cams into
back panel as shown.
back panel
left side
panel
4 Fit dowels of left side panel into corresponding holes
of back panel as shown. Turn each cam clockwise until it
securely engages each cam screw, using a phillips head
screwdriver.
partition
5 Fit dowels of assembled unit into corresponding holes
of partition as shown. Secure all cams.
Made in China - r04 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
COLFAX MEDIA STAND
right side
panel
bottom
panel
6 Fit dowels of bottom panel into corresponding holes
of assembled unit as shown. Secure all cams.
NOTE: Do not over
tighten the bolts
right side
panel
bottom
panel
left side
panel
7 With the assistance of another adult, position unit as
shown. Fit dowels of bottom panel into corresponding
holes of right side panel as shown.
top panel
8 Secure bottom panel to left and right side panels
with 3 bolts per side as shown, using a screwdriver. Do
not over tighten the bolts.
9 With the assistance of another adult, position unit
upright. Fit dowels of top panel into corresponding holes
of assembled unit as shown. Secure all cams. At this
point, cover all exposed cams with cam covers.
Made in China - r04 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
COLFAX
A
MEDIA STAND
shelf pin
A
A
large shelf
B
small shelf
10 A) Insert 8 shelf pins at desired shelf heights as
shown. Turn shelf pins clockwise to secure.
B) Place 1 small shelf and 1 large shelf onto shelf pins
as shown. Make sure shelves are securely supported by
each shelf pin.
SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
A. Insert wall screw (not included) through end of wall strap and
into wall as shown.
B. Insert wall screw (included) through end wall strap and into the
top back of unit as shown.
B
11 A) Fit top of door front into corresponding groove
on underside of the top panel as shown.
B) Fit bottom of door front into corresponding groove of
bottom panel.
Assembly is now complete.
NOTE: Insert screws 3/4"-1"
from the edge of the strap
wall
strap
door front
WALL
wall
screw
Mounting assembly is now complete.
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
wall
screw
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is finished
with a protective clear lacquer.
Made in China - r04 Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
(NOTE: Additional
screw not included.
Please consult your
local hardware store.)
Page 4 of 4
Loading...