COLE SIX DRAWER DRESSER
HARDWARE
Thank you for purchasing the Cole Six Drawer Dresser.
This page lists all the contents included in the boxes.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
BOX 1
29 - wood
dowels
24 - medium
screws
Missing hardware? Please call 800.606.6387 for replacements.
23 - cam
screws
4 - leg
plates
23 - cams
23 - cam
covers
9 - large
screws
12 - small
screws
TOOLS REQUIRED
phillips head screwdriver
COMPONENTS
BOX 2
1 - top
panel
1 - bottom
panel
1 - back
panel
Made in China - r05 Page 1 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
2 - side panels
(1 left, 1 right)
1 - partition
4 - legs
1 - center
support
6 - drawer fronts
12 - drawer sides
(6 left, 6 right)
6 - drawer backs
6 - drawer bottoms
COLE SIX DRAWER DRESSER
NOTE: Make sure
arrows on each cam
points toward nearest
edge with holes
A
side
panel
B
back
panel
1 A) Insert 4 wood dowels, 3 cam screws, and 2 cams into left
and right side panels as shown. Secure cam screws with a
phillips head screwdriver. Make sure arrows on each cam
points toward nearest edge with holes.
B) Insert 14 cams, 3 cam screws and 14 wood dowels into
back panel as shown.
left side
panel
right side
panel
back
panel
2 Fit dowels of back panel into corresponding holes
of left and right side panels as shown. With a
screwdriver, turn cams clockwise until it securely
engages each cam screw.
partition
3 Insert 5 cams and 7 wood dowels into partition
as shown.
partition
4 Fit dowels of partition into corresponding holes
of assembled unit as shown. Secure 3 cams.
Made in China - r05 Page 2 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
COLE SIX DRAWER DRESSER
top
panel
top
panel
5 Insert 10 cam screws into top panel as shown.
bottom
panel
6 With the assistance of another adult, position assembly
as shown. Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure 10 cams.
B
A
bottom
panel
7 Insert 4 cam screws into bottom panel as shown.
Made in China - r05 Page 3 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
8 A) Fit dowels of assembled unit into corresponding holes
of bottom panel as shown. Secure 4 cams.
B) Secure bottom panel with 9 large screws as shown, using
a phillips head screwdriver.
COLE SIX DRAWER DRESSER
leg
plate
leg
9 Attach leg plate to leg with 3 medium screws per
leg as shown. Secure screws with a screwdriver.
center
B
leg
A
assembly
support
C
cam
covers
10 A) Attach 4 leg assemblies onto bottom of assembled unit
with 3 medium screws per leg assembly as shown. Secure, but
do not overtighten screws with a screwdriver.
B) Attach center support onto bottom of assembled unit. Turn
center support clockwise to secure as shown.
C) Conceal all exposed cams with cam covers.
drawer
front
right drawer
side
left drawer
side
11 Slide left and right drawer sides into
corresponding grooves of drawer front as shown.
Make sure groove on the
drawer front is aligned with
groove on the
side panels
drawer
bottom
12 Slide drawer bottom into corresponding grooves
of drawer assembly as shown.
Made in China - r05 Page 4 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
COLE SIX DRAWER DRESSER
drawer
back
13 Slide drawer back into corresponding grooves of
drawer assembly as shown.
drawer
assembly
14 Place drawer assembly upside down onto a clean,
padded surface as shown. Secure drawer bottom of
drawer assembly with 2 small screws as shown, using a
screwdriver.
Repeat steps 11-14 for remaining 5 drawer assemblies.
drawer
A
assembly
center
B
support
adjustment
15 A) With the assistance of another adult, position unit
upright as shown. Fit drawer glide wheels over wheels on
the cabinet glides and push in while lifting slightly.
B) Adjust floor glide on center support leg until it hits the
floor.
Assembly is now complete.
Made in China - r05 Page 5 of 5
Customer Service 800.967.6696 | www.crateandbarrel.com
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
CLEANING AND CARE
Loading...