CHROME 4 SHELF UNIT
Thank you for purchasing the Chrome 4 Shelf Unit. This
page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
HARDWARE
4 - feet 4 - large
4 - brackets 1 - hex
Missing hardware?
Please call 800.606.6387 for replacements.
1 - small
nut
bolt
bolts
WALL MOUNTING HARDWARE
2 - mounting
brackets
4 - large
screws
4 - plastic
anchors
TOOLS REQUIRED
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
hex wrench (not included)
COMPONENTS
2 - side frames
4 - shelves
side frame
2 - crossbars
1 Attach 2 feet to each side frame as shown. To secure,
turn each foot clockwise.
Made in Taiwan - r02 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CHROME 4 SHELF UNIT
bracket
side frame
bracket
side frame
shelf
bracket
shelf
upright
shelf
shelf
2 With the assistance of another adult, fit brackets of shelf
between uprights of each side frame as shown. Press
down on shelf firmly until it is securely supported by the
corresponding side rail below.
A
crossbar
shelf
3 With the assistance of another adult, attach remaining
3 shelves to side frames by securing bracket of each
shelf into corresponding uprights of side frames as
shown.
4 A) Attach 2 crossbars to assembled unit with 2
brackets and 2 large bolts per crossbar as shown.
Secure, but do not over tighten, bolts using a allen
wrench.
B) Secure crossbars with 1 small bolt and 1 hex nut.
Secure, but do not over tighten, bolt by turning allen
wrench clockwise and hex wrench counter clockwise.
Assembly is now complete.
bracket
large
B
crossbar
bolt
A
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Made in Taiwan - r02 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CHROME 4 SHELF UNIT
SAFETY MOUNTING INSTRUCTIONS:
For added safety and stability, it is recommended that
the wall mounting hardware be installed. For safe
mounting, it is essential to use wall anchors
appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever
possible.
A) Attach 2 mounting brackets to back of unit by
fitting hook of mounting bracket onto upright of unit
as shown.
B) Determine the final location of unit. Mark position
on the wall.
C) Drill 2 holes in the wall stud. If the wall stud is not
available, drill 2 holes in the wall that are slightly
smaller in diameter than the anchor. Insert 2 plastic
anchors and insert into pre-drilled holes. If necessary,
gently tap the plastic anchor until the flange of the
anchor is flush with the wall.
D) Attach wall brackets to the wall by inserting 1
large screw through each bracket and into each
plastic anchor in the wall. Secure each screw with a
phillips head screwdriver.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware
store.
C
WALL
plastic
anchor
mounting
A
bracket
mounting
D
screw
Made in Taiwan - r02 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...