Crate & Barrel Chrome Four-Drawer Cart Assembly Instruction
CHROME 4 DRAWER CART
HARDWARE
Thank you for purchasing the Chrome 4 Drawer Cart.
This page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - brackets 1 - hex
nut
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
allen wrench
(included)
side frame
1 - small
bolt
8 - large
bolts
hex wrench
(included)
bracket
A
16- pins
side frame
1 - top panel
4 - drawers
2 - wheels
2 - locking
wheels
Made in Taiwan - r05 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - side frames
8 - drawer
glides
2 - short
crossbars
2 - long
crossbars
A
left wheel
short
crossbar
1 A) Attach 2 short crossbars to side frames with 2
brackets and 2 large bolts per side as shown. Secure, but
do not over tighten, bolts using an allen wrench.
B) Attach 2 wheels and 2 locking wheels to assembled unit
as shown. Secure, but do not over tighten, wheels using a
hex wrench.
left wheel
locking wheel
NOTE: Do not over
tighten the bolts
short
crossbar
B
locking wheel
CHROME 4 DRAWER CART
NOTE: Do not over
tighten the bolts
B
long
crossbar
C
glide
bracket
A
upright
A
2 A) Attach 8 drawer glides to assembled
unit by fitting brackets of drawer glide into
uprights of side frame as shown. Make sure
drawer glides face in as shown.
B) Attach 2 long crossbars to assembled
unit with 2 brackets and 2 large bolts per
crossbar as shown. Secure, but do not over
tighten, bolts using a allen wrench.
C) Secure long crossbars with 1 small bolt
and 1 hex nut by turning allen wrench
clockwise and hex wrench counter clockÂwise.
bracket
B
C
A
A
B
top drawer
B
top panel
3 A) Fit top drawer into corresponding grooves
of drawer glides. Fit 4 pins into corresponding
holes of assembled unit as shown
B) Attach top panel to assembled unit by fitting
brackets of top panel into uprights of each side
frame as shown
C) Fit all remaining drawers into corresponding
grooves of drawer glides. Fit remaining pins into
corresponding holes of assembled unit as shown.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
Made in Taiwan - r04 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...