Crate & Barrel Carson Light Pine Extension Table, Carson Pine Table Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
CARSON EXTENSION DINING TABLE
Thank you for purchasing the Carson Extension
Dining Table. This page lists all the contents
included in the box. Please take time to identify the
hardware as well as the individual components of
this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assembly this
product.
COMPONENTS
1 - tabletop
1 - extension leaf
4 - legs
Made in Vietnam
HARDWARE
8 - flat washers
8 - bolts
8 - spring washers
Missing hardware? Please call 800.606.6387 for replacements.
TOOLS REQUIRED
Allen Wrench (included)
x 4
B
A
1 A. With the assistance of another adult, lay tabletop
upside down on a clean, padded surface.
B. Fit 4 legs into position, aligning holes in legs with holes in
corner blocks of the tabletop. Insert 1 bolt, 1 split washer
and 1 flat washer through corner brace and into leg. Repeat
for remaining 3 legs and fully tighten all bolts with the allen
wrench provided.
Page 1 of 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
CARSON EXTENSION DINING TABLE
EXTENSION
LEAF
x 2
2 Place table in an upright position. Locate clasps on
underside of tabletop and unlock as shown.
x 4
4 Complete assembly by relatching the 4 clasps that
connect the tabletop to the leaf.
Made in Vietnam
A
B
3 A. Open tabletop by pulling from both ends to expose
support rails.
B. Place leaf into postion and slide tabletop closed.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 2 of 2
Loading...