Crate & Barrel Calais Round Coffee Table Assembly Instruction

CALAIS ROUND COFFEE TABLE

HARDWARE

8 - nuts 24 - washers 24 - caps 1 - center

hole cap

Thank you for purchasing the Calais Round Coffee
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

8 - short bolts

Missing hardware? Please call 800.606.6387 for replacements.

8 - long bolts

COMPONENTS

1 - table top

1 - center
connector

4 - legs

TOOLS REQUIRED

2 - wrenches (provided)

cap

washer

nut

cap

washer

1 Place tabletop upside down onto a clean, padded surface.
Loosely attach each leg to tabletop by inserting the hardware
as illustrated through each of the two holes. Do not fully
tighten the bolts.

Made in China - r03 Page 1 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com

long bolt

CALAIS ROUND COFFEE TABLE

2 Align holes in center connector with holes in legs. Loosely
attach center connector to each leg as illustrated. At this point,
fully tighten all the bolts installed in steps 1-2 with the hex
wrenches provided. Cover all bolts with bolt caps.

washer

short bolt

cap

center hole cap

3 With the assistance of another adult, place the
table upright. If not using an umbrella, conceal hole
in the tabletop with the center hole cap.
Assembly is now complete.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Made in China - r03 Page 2 of 2

Customer Service 800.967.6696 | www.crateandbarrel.com