Crate & Barrel Cabria Extension Dining Table Assembly Instruction
CABRIA EXTENSION DINING TABLE
HARDWARE
Thank you for purchasing the Cabria Extension Dining
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
A
leg
B
8 - nuts 8 - flat
washers
Missing hardware? Please call 800.606.6387 for replacements.
8 - spring
washers
TOOLS REQUIRED
hex wrench (included)
COMPONENTS
1 - tabletop
4 - legs1 - leaf
1 A) With the assistance of another adult, place
tabletop face down onto a clean, padded surface.
Insert threaded bolts of each leg into tabletop as
shown. Attach each leg with 2 nuts, 2 spring
washers and 2 flat washers.
B) Fully tighten all nuts with a hex wrench.
spring
washer
flat
washer
Customer Service 800.967.6696 | www.crateandbarrel.com
nut
Made in Indonesia - r02 Page 1 of 2
CABRIA EXTENSION DINING TABLE
EXTENSION LEAF INSTALLATION
A
CLOSED & LOCKED
POSITION
2 A. Place table upright and locate the 2 metal clasps on the underside of the tabletop. Unlock each clasp by
pulling down on the lever.
B. With the assistance of another adult, pull 2 tabletop sections apart. Place leaf into position, aligning metal
pins on leaf with matching locator holes. Push both tabletops towards the center.
OPEN & UNLOCKED
POSITION
B
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture
wax or polish as the wood is finished with a
protective clear lacquer.
3 Re-latch clasps on underside of tabletop to the
leaf. Installation of the leaf is now complete.
Made in Indonesia - r02 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
Loading...