Crate & Barrel Bungalow Sideboard Assembly Instruction

BUNGALOW SIDEBOARD

HARDWARE

Thank you for purchasing the Bungalow Sideboard.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - large
bolts

17 - flat
washers

Missing hardware? Please call 800.606.6387 for replacements.

12 - medium
bolts

17 - spring
washers

1 - small
bolt

12 - wood
dowels

4 - pull
bolts

8 - shelf
pins

TOOLS REQUIRED

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

1 - top
panel

2 - side panels

(1 left, 1 right)

1 - support
leg

Made in China - r04 Page 1 of 4

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

2 - pulls 2 - doors

1 - middle
panel

1 - partition 2 - back

panels

(1 left, 1 right)

1 - bottom
panel

2 - adjustable
shelves

BUNGALOW SIDEBOARD

A

B

NOTE: Do not over
tighten the bolts

1 A) Insert 4 wood dowels into partition as shown.
B) Insert 4 wood dowels into left and right side
panels as shown.

sliding door grooves
at front

medium
bolt

2 Attach support leg to bottom panel with 1 small bolt,
1 spring washer and 1 flat washer as shown. Secure,
but do not over tighten, bolts with an allen wrench.

3 Fit dowels of side panels and partition into corresponding
holes of bottom panel as shown. Make sure back grooves of
side panels and partition are positioned towards the back,
while the sliding door grooves on bottom panel are positioned
towards the front. Using an allen wrench, secure bottom

panel with 6 medium bolts, 1 spring washer and 1 flat
washer as shown.

Made in China - r04 Page 2 of 4

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

4 With the assistance of another adult, position unit
upright as shown. Fit 2 back panels into corresponding
back grooves of side panels and partition as shown.