Crate & Barrel Bungalow Extension Dining Table Assembly Instruction
BUNGALOW EXTENSION DINING TABLE
HARDWARE
Thank you for purchasing the Bungalow Extension
Dining table. This page lists all the contents included
in the box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
6 - wood
dowels
8 - bolts 6 - barrel
screws
8 - flat
washers
8 - spring
washers
6 - barrel
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
phillips head screwdriver
flat head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
NOTE: Do not over
tighten the cam screws
1 - tabletop
assembly
2 - short
crossbars
Made in China - r04
1 - leaf
4 - legs
(2 leg A, 2 leg B)
B
A
leg
1 - long
crossbar
1 Insert 1 barrel screw and 1 wood dowel into each
leg as shown. Secure, but do not over tighten, barrel
screws with a phillips head screwdriver.
Customer Service 800.967.6696 | Latest instructions aavilable at www.crateandbarrel.com
Page 1 of 3
BUNGALOW EXTENSION DINING TABLE
long
crossbar
A
short
NOTE: Make sure
holes of each
barrel nut aligns
with nearest edge
with holes
2 A) Using a screwdriver, remove set screws from
barrel nuts and set aside until further instructions.
Insert 2 barrel nuts into long and short crossbars as
shown. With a flat head screwdriver, make sure holes
of each barrel nut aligns with nearest hole on edge.
B) Insert 1 barrel screw and 1 wood dowel into short
crossbars as shown.
crossbar
B
3 Fit dowels and barrel screws of leg A and leg B into corresponding holes of short crossbar. Make sure barrel screws are
fully engaged in barrel nuts. Insert set screws back into barrel
nuts. Using a flat head screwdriver, turn screws clockwise to
secure.
leg B
short
crossbar
leg A
NOTE: Make sure
grooves of each leg
are facing outwards
as shown
NOTE: Do not fully
tighten the bolts
A
leg assembly
A
B
A
long
crossbar
B
A
tabletop
4 A) With the assistance of another adult, place tabletop
onto a clean, padded surface. Fit leg assembly into corresponding grooves of tabletop and loosely attach with 2
bolts, 2 flat washers and 2 spring washers per corner
block.
B) Fit dowel of leg assembly into corresponding hole of
long crossbar as shown. Make sure barrel screw is fully
engaged in barrel nut. Insert set screw back into barrel nut
and secure.
Made in China - r04 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 A) Fit remaining leg assembly into corresponding grooves of
tabletop and loosely attach with 2 bolts, 2 flat washers and 2
spring washers per corner block. At this point, fully tighten all
bolts with an allen wrench.
B) Fit dowel of leg assembly into corresponding hole of long
crossbar as shown. Insert set screw back into barrel nut and
secure. With the assistance of another adult, position table
upright. Assembly is now complete.
Loading...