Crate & Barrel Bungalow Desk Chair Assembly Instruction

BUNGALOW DESK CHAIR

HARDWARE

Thank you for purchasing the Bungalow Desk Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - bolts 4 - spring

Missing hardware? Please call 800.606.6387 for replacements.

4 - flat
washers

washers

TOOLS REQUIRED

hex wrench (included)

NOTE: Make sure arrow on
adjuster points towards front
edge of seat.

1 - base

1 - seat
adjuster

1 - gas lift

Made in China - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - seat

5 - wheels

FRONT

1 Attach seat adjuster to seat as shown. Make sure
arrow on adjuster points toward the front edge of the
seat. Secure adjuster with 4 bolts, 4 spring washers
and 4 flat washers as shown, using a hex wrench.

BUNGALOW DESK CHAIR

B

gas lift

VIEW FROM BELOW

A

wheels

2 A) Insert 5 wheels into base as shown. Turn each
wheel clockwise to secure.
B) Insert gas lift into base assembly as shown. Press
firmly to secure

base

OPERATING
INSTRUCTIONS

1 HEIGHT ADJUSTMENT:

while sitting in the chair, pull the lever
up to lower the seat. To raise the seat,
take your weight off the chair and pull the lever up.

2 LOCKING THE SEAT:

While sitting in the chair, lean your weight forward and
push the lever in.

3 Fit top of gas lift into corresponding hole on the bottom
of the seat assembly as shown.

NOTE: Finalize assembly by sitting heavily on the chair a
few times. This wil secure all the component
connections.

1

2

3

4

3 UNLOCKING THE SEAT:

While sitting in the chair, lean you weight forward and
pull the lever out.

4 ADJUSTING THE TENSION:

Tighten the knob to increase the back tension (less
rocking). Loosen the knob to decrease the back
tensions (more rocking).

Made in China - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture
wax or polish as the unit is finished with a protec­tive clear lacquer. It is recommended to use
coasters to protect surface from heat and water.