Page 1
BUNGALOW DESK
HARDWARE
Thank you for purchasing the Bungalow Desk. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
10 - wood
dowels
13 - flat
washers
Missing hardware? Please call 800.606.6387 for replacements.
5 - long
bolts
13 - spring
washers
8 - short
bolts
2 - screws
TOOLS REQUIRED
phillips head screwdriverallen wrench (included)
(We recommend the use of hand tools instead of power tools)
1 - desktop
2 - front legs
(1 left, 1 right)
2 - back legs
(1 left, 1 right)
Made in China - r04 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 - feet
1 - support
leg
1 - fixed
shelf assembly
1 - shelf
crossbar
Page 2
BUNGALOW DESK
shelf
A
crossbar
back leg
frame assembly
left
back
leg
B
shelf
crossbar
back leg
frame assembly
right
back
leg
1 A) Insert 2 wood dowels into shelf crossbar as
shown.
B) Fit dowels of crossbar into corresponding holes of
left/right back leg as shown. Secure legs with 2 screws
through top of shelf crossbar using a phillips head
screwdriver.
left
front
leg
right
front
leg
desktop
(with pre-assembled drawer)
2 With the assistance of another adult, carefully position
desktop onto a clean, padded surface. Attach left/ right
front legs and back leg frame assembly onto desktop,
and open drawer assembly, and secure with 2 short
bolts, 2 spring washers, and 2 flat washers per leg as
shown.
fix shelf
A
assembly
assembled
B
unit
3 A) Insert 4 wood dowels into the fixed shelf
assembly as shown.
B) Insert 1 wood dowel into each leg of assembled unit.
Made in China - r04 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 3
BUNGALOW DESK
foot
support leg
fixed shelf
assembly
4 A) Fit dowels of legs into corresponding holes of fixed shelf
assembly as shown.
B) Fit dowels of fixed shelf assembly into holes of
corresponding feet as shown.
C) Secure each foot with 1 long bolt, 1 spring washer, and 1
C
flat washer as shown, using an allen wrench.
B
long bolt
A
C
spring washer
flat washer
foot
B
fixed shelf assembly
A
assembled
unit
5 With the assistance of another adult, carefully position unit
upright.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters (without rubber feet) to
protect surface from heat and water.
Made in China - r04 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...