Crate & Barrel Brighton Trundle Bed Assembly Instruction
BRIGHTON TRUNDLE
HARDWARE
Thank you for purchasing the Brighton Trundle. This
page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - bolts 4 - brackets
8 - large
screws
8 - spring
washers
8 - flat
washers
24 - small
screws
Missing hardware?
Please call 800.606.6387
for replacements.
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
NOTE: Make sure
wheels on each
corner support
are facing the
L
bottom as shown
1 - footboard
1 - left side rail
1- headboard
1 - right side rail
R
NOTE: Do not
over tighten the
bolts and screws
headboard
R
footboard
1 Fit dowel of left and right corner supports into
corresponding holes of footboard and headboard as shown.
Secure each support with 1 bolt, 1 spring washer, and 1 flat
4 - corner
supports
(2 left, 2 right)
Made in Vietnam - r05 Page 1 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - slat assembly
washer, using a phillips head screwdriver. Do not over
tighten the bolts.
L
BRIGHTON TRUNDLE
bracket
L
R
R
footboard
headboard
2 Attach 2 brackets to footboard and headboard with
3 small screws per bracket, using a screwdriver. Do not
over tighten the screws.
L
R
R
headboard
A
L
left side rail
B
footboard
R
3 A) With the assistance of another adult, fit dowels of
headboard and footboard into corresponding holes of right
side rail as shown. Secure each corner with 1 bolt, 1 spring
washer, and 1 flat washer.
B) Attach each bracket of headboard and footboard to
right side rail with 3 small screws per bracket.
Repeat step 3 for right side rail.
right side rail
Brighton twin
bed (sold separately)
trundle
5 With the assistance of another adult, roll trundle
under Brighton twin bed (sold separately).
Assembly is now complete.
4 Attach slat assembly to assembled unit with 8
large screws. Secure each screw with a
CLEANING & CARE
screwdriver.
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer.
Made in Vietnam - r05 Page 2 of 2
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...