Crate & Barrel Brighton Storage Drawer Assembly Instruction

BRIGHTON STORAGE DRAWER

HARDWARE

Thank you for purchasing the Brighton Storage
Drawer. This page lists the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

12 - cam

12 - cams

4 - wheels16 - screws

screws

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

ASSEMBLY

NOTE: Make sure

arrows on each
cam points toward
nearest edge with
holes

A

base
panel

1 - base panel

1 - front panel

B

NOTE: Do not over

tigthen the cam
screws

left and right
side panels

1 A) Insert 4 cams into base panel as shown. Make sure
arrows on each cam points toward nearest edge with

1 - back panel

2 - side panels
(1 right, 1 left)

holes.
B) Insert 2 cams and 4 cam screws into left and right
side panel. Secure, but do not over tighten the cam
screws with a phillips head screwdriver.

Made in Vietnam - r03 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

BRIGHTON STORAGE DRAWER

right side
panel

back panel

2 A) Insert 4 cams into back panel as shown.

back panel

base panel

3 Fit dowels of base panel into corresponding holes of
right side panel. With a screwdriver, turn each cam counter
clockwise until it securely engages each cam screw.

left side panel

4 Fit dowels of back panel into corresponding holes
of the assembled drawer unit. Secure all cams.

Made in Vietnam - r03 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

5 Fit dowels of left side panel into corresponding
holes of the assembled drawer unit. Secure all cams.