BRIGHTON STORAGE BENCH
HARDWARE
Thank you for purchasing the Brighton Storage
Bench. This page lists the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
30 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
30 - spring
washers
30 - flat
washers
12 - shelf
supports
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - front
frame
1 - back
panel
1 - top
panel
Made in Vietnam - r04 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - bottom
panel
2 - partitions
1 - adjustable
shelf
2 - side panels
(1 left, 1 right)
2 - doors
(1 left, 1 right)
2 - adjustable
notched shelves
BRIGHTON STORAGE BENCH
NOTE: Make sure
notched corner of
each partition are
assembled on the
same side
left
partition
right
partition
NOTE: Make
sure ledge of
each partition
faces outward
bottom
panel
1 Fit dowels of left and right partitions into corresponding
holes of bottom panel as shown. When assembling
partitions, make sure the ledges face outwards and notched
corners are on the same side. Secure bottom panel with 4
bolts, 4 spring washers and 4 flat washers, using a phillips
head screwdriver. Do not over tighten the bolts.
NOTE: Do not
over tighten
the bolts
right side
panel
bottom
panel
left side
panel
2 Fit left and right side panels onto bottom panel of
assembled unit as shown. Secure side panels with 4
bolts, 4 spring washers and 4 flat washers as shown.
side
panel
back
frame
back
frame
3 With the assistance of another adult, fit dowels of
assembled unit into corresponding holes of back frame as
shown. Secure assembly with 2 bolts, 2 spring washers,
and 2 flat washers per side panel.
front
frame
4 Fit dowels of assembled unit into corresponding holes
of front frame as shown. Secure front frame with 2 bolts,
2 spring washers, and 2 flat washers per side panel.
front
frame
Made in Vietnam - r04 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
BRIGHTON STORAGE BENCH
top
panel
A
A
adjustable
shelf
shelf
support
5 With the assistance of another adult, carefully position unit
upright. Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure top panel with 14 bolts,
14 spring washers and 14 flat washers.
right
door
left
door
adjustable
notched shelf
B
6 A) Insert 12 shelf supports at desired shelf heights as
shown.
B) Place 1 adjustable shelf and 2 adjustable notched
shelves into assembled unit. Make sure each shelf is
securely supported by each shelf support.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
7 Insert top edge of right door into top groove of
unit as shown. At this point, align bottom edge of door
into bottom groove of unit. Fit door into place. Repeat
steps for left door.
Assembly is now complete.
Made in Vietnam - r04 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...