Crate & Barrel Brighton Six-Drawer Dresser Assembly Instruction

BRIGHTON SIX DRAWER DRESSER

ASSEMBLY HARDWARE

Thank you for purchasing the Brighton Six Drawer
Dresser. This page lists the contents included in the

box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

26 - bolts

Missing hardware? Please call 800.606.6387 for replacements.

26 - flat
washers

26 - spring
washers

48 - medium
screws

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

2 - small
drawer
fronts

2 - side panels

(1 left, 1 right)

1 - front
frame

1 - top
panel

1 - back
panel

Made in Vietnam - r05 Page 1 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - partition

1 - support leg

6 - drawer
bottoms

2 - small
drawer back

4 - large
drawer
fronts

4 - large
drawer back

4 - small
drawer
sides

(2 left, 2 right)

8 - large
drawer
sides

(4 left, 4 right)

BRIGHTON SIX DRAWER DRESSER

left side
panel

A

support
leg

partition

right side
panel

back
panel

B

B

NOTE: Do not
over tighten
the bolts

1 A) Attach support leg to partition. Turn leg clockwise to
secure.
B) Fit dowels of partition and left/right side panels into
corresponding holes of back panel as shown. Secure side
panels with 3 bolts, 3 spring washers, and 3 flat washers per
side panel, using a phillips head screwdriver.

top
panel

front
frame

2 Fit dowels of assembled unit into corresponding holes of
front frame, and fasten with 3 bolts, 3 spring washers, and
3 flat washers per side panel as shown.

NOTE: Do not
over tighten
the screws

large drawer
left side

large drawer

A

front

large drawer

B

back

4 A) Fit pre-attached dowels of large drawer front into

3 With the assistance of another adult, position unit upright.
Fit dowels of assembled unit into corresponding holes of top

panel, and secure with 14 bolts, 14 spring washers, and 14
flat washers as shown.

Made in Vietnam - r05 Page 2 of 3

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

corresponding holes of large drawer left side as shown.
Secure drawer front with 2 screws, using a phillips head
screwdriver. Do not over tighten the screws.
B) Attach large drawer back with 2 screws as shown.