BRIGHTON NIGHTSTAND
HARDWARE
Thank you for purchasing the Brighton Nightstand.
This page lists the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - screws16 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
16 - spring
washers
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
16 - flat
washers
1 - dust
panel
2 - leg frames
(1 front, 1 back)
2 - side panels
(1 left, 1 right)
Made in Vietnam - r08 Page 1 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - drawer
front
1 - top
shelf
1 - drawer
bottom
1 - top
panel
1 - bottom
shelf
1 - drawer
back
2 - drawer sides
(1 left, 1 right)
BRIGHTON NIGHTSTAND
B
bottom
shelf
side
panel
left side
panel
right side
leg
frame
panel
back leg
frame
1 Fit dowels of left and right side panels into
corresponding holes of back leg frame. Secure
assembly with 2 bolts, 2 spring washers, and 2 flat
washers as shown, using a phillips head screwdriver.
C
top
shelf
A
dust
panel
bottom
shelf
leg
frame
2 A) Slide dust panel into corresponding grooves of left
and right side panels of assembled unit as shown.
B) Attach bottom shelf to back leg frame with 2 bolts, 2
spring washers, and 2 flat washers as shown.
C) Fit dowels of top shelf into corresponding holes of back
leg frame.
B
front leg
frame
slat
NOTE: Slat pre-attached
to front leg frame for
shipping purposes. Please
remove before assembly.
3 With a screwdriver, remove slat from front leg
frame as shown. Set 2 screws aside and discard.
front leg
frame
A
B
B
4 A) Fit dowels of assembled unit into corresponding
holes of front leg frame as shown. Attach side panel
assembly to front leg frame with 2 bolts, 2 spring
washers, and 2 flat washers as shown.
B) Attach bottom shelf to front leg frame with 2
bolts, 2 spring washers, and 2 flat washers as shown.
A
Made in Vietnam - r08 Page 2 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
BRIGHTON NIGHTSTAND
top
panel
NOTE: Do not
over tighten
the screws
5 Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure top panel with 8
bolts, 8 spring washers, and 8 flat washers.
drawer left
side
A
drawer
front
B
drawer
back
6 A) Fit pre-attached dowels of drawer front into
corresponding holes of drawer left side as shown.
Secure drawer front with 2 screws, using a phillips head
screwdriver. Do not over tighten the screws.
B) Attach drawer back with 2 screws as shown.
drawer right
side
drawer
bottom
7 Slide drawer bottom into corresponding grooves of
drawer front and back as shown.
8 Fit pre-attached dowels of drawer right side into
corresponding holes of drawer assembly, and secure
with 4 screws as shown.
Made in Vietnam - r08 Page 3 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
BRIGHTON NIGHTSTAND
drawer
assembly
9 Insert drawer assembly into the case, fitting wheels of
drawer glide into rail of case glides.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
Made in Vietnam - r08 Page 4 of 4
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...