BRIGHTON FOUR DRAWER CHEST
ASSEMBLY HARDWARE
Thank you for purchasing the Brighton Four Drawer
Chest. This page lists the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
22 - flat
washers
Missing hardware? Please call 800.606.6387 for replacements.
22 - spring
washers
32 - screws22 - bolts
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
2 - side panels
(1 left, 1 right)
4 - drawer
fronts
Made in Vietnam - r06 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - front
frame
4 - drawer
bottoms
1 - back
panel
4 - drawer
backs
1 - top
panel
8 - drawer sides
(4 left, 4 right)
BRIGHTON FOUR DRAWER CHEST
NOTE: Do not
over tighten
the bolts
left side
panel
right side
panel
back
panel
1 Fit dowels of left/right side panels into corresponding
holes of back panel, and fasten with 3 bolts, 3 spring
washers, and 3 flat washers per side panel as shown.
Secure, but do not over tighten, bolts with a phillips head
screwdriver.
front
frame
2 Fit dowels of assembled unit into corresponding holes of
front frame, and fasten with 3 bolts, 3 spring washers, and
3 flat washers per side panel as shown.
top
panel
3 With the assistance of another adult, position unit
upright. Fit dowels of assembled unit into corresponding
holes of top panel, and secure with 10 bolts, 10 spring
washers, and 10 flat washers as shown.
NOTE: Do not
over tighten
the screws
drawer left
side
A
drawer
front
B
drawer
back
4 A) Fit pre-attached dowels of drawer front into
corresponding holes of drawer left side as shown.
Secure drawer front with 2 screws, using a phillips head
screwdriver. Do not over tighten the screws.
B) Attach drawer back with 2 screws as shown.
Made in Vietnam - r06 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
BRIGHTON FOUR DRAWER CHEST
drawer
bottom
drawer right
side
5 Slide drawer bottom into corresponding grooves
of drawer front and back as shown.
drawer
assembly
6 Fit dowels of drawer assembly into corresponding
holes of drawer right side and secure with 4 screws as
shown.
Repeat steps 4-6 for remaining drawer assemblies.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
7 Insert drawer assembly into the case, fitting wheels of
drawer glide into rail of case glides. Repeat step 7 for
remaining drawer assemblies.
Assembly is now complete.
Made in Vietnam - r06 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...