Crate & Barrel Brighton Daybed Assembly Instruction

BRIGHTON DAYBED

Thank you for purchasing the Brighton Daybed.

This page lists the contents included in the box.

Please take time to identify the hardware as
well as the individual components of this product.

As you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

HARDWARE

12 - screws

Missing hardware? Please call 800.606.6387 for replacements.

TOOLS REQUIRED

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer.

COMPONENTS

2 - side panels

(1 left, 1 right)

1 - slat assembly

1 - center rail

1 - front panel

1 - back panel

Made in Vietnam - r01 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

BRIGHTON DAYBED

bracket

slot

left side panel

back panel

A

front panel

B

right side panel

1 A) With the assistance of another adult, fit brackets
of back panel into corresponding slots of right side
panel as shown. Make sure brackets are scurely
engaged into slots by firmly pressing back panel down.
B) Fit brackets of front panel into corresponding slots
of right side panel as shown.

Repeat steps for left side panel.

center rail

bracket

2 Fit center rail onto each bracket of right/left side
panels as shown. Make sure center rail is securely
supported by each bracket.

slat assembly

3 Attach slat assembly to back/front panel with 12
screws as shown. Secure, but do not over tighten, the
screws with a phillips head screwdriver. Make sure
straps of slat assembly are facing up as shown.
Assembly is now complete.

Made in Vietnam - r01 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com