BRIGHTON CHIFFOROBE
ASSEMBLY HARDWARE
Thank you for purchasing the Brighton Chifforobe.
This page lists the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
30 - flat
washers
30 - spring
washers
40 - screws30 - bolts
12 - shelf
supports
WALL MOUNTING HARDWARE
4 - small
screws
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
screws
2 - wall
straps
4 - wall
brackets
4 - plastic
anchors
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - top
panel
2 - side panels
(1 left, 1 right)
5 - drawer
fronts
Made in Vietnam - r02 Page 1 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 - drawer
bottoms
5 - drawer
backs
1 - partition
1 - front
frame
10 - drawer sides
(5 left, 5 right)
1 - bottom
panel
1 - back
frame
3 - shelves
BRIGHTON CHIFFOROBE
right side
panel
bottom
panel
NOTE: Do not
over tighten
the bolts
back
frame
1 Fit dowels of right side panel into corresponding holes of
back frame as shown. Secure side panel with 3 bolts, 3
spring washers and 3 flat washers, using a phillips head
screwdriver. Do not over tighten the bolts.
partition
2 Fit slot of bottom panel onto corresponding crossbar of
back panel as shown. Secure bottom panel to assembled
unit with 4 bolts, 4 spring washers and 4 flat washers.
left side
panel
3 Fit dowels of partition into corresponding holes of
back panel as shown. Make sure glides of partition and
right side panel face each other.
Made in Vietnam - r02 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
4 Fit dowels of left side panel into corresponding holes
of assembled unit as shown. Secure side panel with 3
bolts, 3 spring washers and 3 flat washers.
BRIGHTON CHIFFOROBE
front
frame
top
panel
5 With the assistance of another adult, fit dowels of
assembled unit into corresponding holes of front
frame as shown. Secure front frame with 6 bolts, 6
spring washers and 6 flat washers.
NOTE: Do not
over tighten
the screws
drawer left
side
A
drawer
front
B
drawer
back
6 With the assistance of another adult, position unit
upright as shown. Fit dowels of assembled unit into
corresponding holes of top panel, and secure with 14
bolts, 14 spring washers, and 14 flat washers.
drawer
bottom
7 Fit dowels of drawer front and drawer back into
corresponding holes of drawer left side, and secure
with 4 screws using a screwdriver. Do not over tighten
8 Slide drawer bottom into corresponding grooves of
drawer front and back as shown.
the screws.
Made in Vietnam - r02 Page 3 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
BRIGHTON CHIFFOROBE
drawer right
side
9 Fit dowels of drawer assembly into corresponding
holes of drawer right side and secure with 4 screws as
shown.
Repeat steps 7-9 for remaining drawer assemblies.
A
B
shelves
A
10 Insert drawer assemblies into the case, fitting
wheels of drawer glides into rails of case glides.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
11 A) Open door and insert 12 shelf supports at
desired shelf heights as shown.
B) Place 3 shelves into assembled unit. Make sure each
shelf is securely supported by each shelf support.
Assembly is now complete.
Made in Vietnam - r02 Page 4 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
BRIGHTON CHIFFOROBE
C
plastic
anchor
F
wall
strap
12 Safety Mounting Instructions
For added safety and stability, it is recommended that the
wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Locate pilot holes on back of unit and attach wall
bracket using 2 small screws as shown.
B) Determine the final location of unit. Mark position on the
wall, approximately 2" below the wall bracket mounted to
the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
D) Attach wall bracket to the wall by inserting 2 large
screws into the plastic anchor in the wall.
E) Place the unit so the wall brackets on the back edge are
aligned with the wall brackets on the wall.
F) Lace one end of the wall strap through both brackets,
and into the other end of the strap.
G) Pull the strap tightly until secure.
H) Repeat steps A-G for remaining wall brackets and wall
straps.
Wall mounting assembly is now complete.
wall
bracket
large
D
screw
small
A
screw
NOTE:
If you are unsure about your wall type or
what mounting method you should use,
consult a qualified professional or your
local hardware store.
wall
bracket
Made in Vietnam - r02 Page 5 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...