Crate & Barrel Brey Filing Cabinet Assembly Instruction

ASSEMBLY HARDWARE
Thank you for purchasing the Brey File. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual compo­nents of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
10 - spring washers
15 - small screws
10 - flat washers
20 - large screws
Missing hardware? Please call 800.606.6387 for replacements.
1 - small bolt
1 - threaded bolt cap
4 - pull bolts
4 - bumpers
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
10 - large bolts
2 - side frames
(1 left, 1 right)
1 - shelf1 - top panel
1 - back panel 2 - drawer
Made in Vietnam - r03 Page 1 of 5
1 - glass top
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
2 - crossbars
(1 back, 1 front)
1 - large drawer front
1 - small drawer front
bottoms
1 - large drawer back
1 - small drawer back
2 - file rails
2 - large
drawer sides
(1 left, 1 right)
2 - small
drawer sides
(1 left, 1 right)
2 - pulls
1 - back panel cover
BREY FILE
NOTE: Do not over tighten the bolts
back crossbar
front back crossbar
top panel
right side frame
1 Fit dowels of back/front crossbars and top panel into corresponding holes of right side frame as shown. Secure back/front crossbars and top panel with 1 large bolt, 1 spring washer and 1 flat washer as shown, using an phillips head screwdriver. Do not over tighten the bolts.
shelf
2 Fit shelf into assembly unit as shown. Secure shelf to right side frame with 2 large bolts, 2 spring washers and 2 flat washers as shown, using a screwdriver.
left side frame
A
A
3 A) Fit dowels of back/front crossbars and top panel into corresponding holes of left side frame as shown. Secure back/front crossbars and top panel with 1 large bolt, 1 spring washer and 1 flat washer.
B) Secure shelf to left side frame with 2 large bolts, 2 spring washers and 2 flat washers.
B
B
NOTE: Do not over tighten the screws
threaded bolt cap
A
back
A
panel cover
back
B
panel
small bolt
4 A) Attach back panel cover to back panel with 1 small bolt and 1 threaded bolt cap as shown, using a screw- driver. B) With the assistance of another adult, position assembled unit upright. Attach 1 back panel with 15 small screws as shown, using a phillips head screwdriver. Do not over tighten the screws.
Made in Vietnam - r03 Page 2 of 5
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Loading...
+ 3 hidden pages