Crate & Barrel Brey Desk Assembly Instruction

BREY DESK

HARDWARE

Thank you for purchasing the Brey Desk. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

16 - flat
washers

12- small
bolts

16 - spring
washers

4 - large
bolts

2 - screw
posts

4 - bumpers

2 - barrel
nuts

Missing hardware?
Please call

800.606.6387 for
replacements.

TOOLS REQUIRED

allen wrench (included)

flat head screwdriver

(We recommend the use of hand tools instead of power tools)

phillips head screwdriver

ASSEMBLY

2 - set
screws

1 - desktop

1 - crossbar

Made in Vietnam - r05 Page 1 of 3

1 - glass top

desktop

1 With the assitance of another adult, place desktop
onto a clean, padded surface. Fully extend keyboard tray.

2 - leg frames

(1 left, 1 right)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Release glides of keyboard tray from glides of desktop as
shown.

keyboard
tray

BREY DESK

NOTE: Do not over

tighten screw posts

left and right
leg frame

NOTE: Make sure to align slot

of screw post parallel to leg

crossbar

2 Insert 1 screw post into right leg frame and secure with
a flat head screwdriver. Note: Make sure to align slot on
top of screw post parallel to leg. Do not over tighten screw
posts. Repeat for left leg frame.

CORRECTLY ASSEMBLED

SIDE VIEW DETAIL

crossbar

B

C

3 Insert 2 barrel nuts into the crossbar as shown.
Use a flat head screwdriver to align the hole on the side
of the barrel nut with the hole on the end of the crossbar.

left leg
frame

4 A) Fit dowels of crossbar and screw posts of
left and right leg frames into corresponding
holes as shown. Make sure hole in screw post
aligns with hole in the top of the crossbar.
B) Secure crossbar to left and right leg
frames by inserting a set screw into each
barrel nut. Tighten with a phillips head screw-
driver, making sure set screw securely engages
the screw post of the leg frame.
C) With the assistance of another adult, fit
dowels of left and right leg assembly into
corresponding holes of desktop. Secure left

and right leg frames to desktop with 2 large
bolts, 2 spring washers and 2 flat wasters per

side, using an allen wrench. Do not over
tighten the bolts.

right leg
frame

Made in Vietnam - r05

desktop

NOTE: Do not over
tighten the bolts

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

C

Page 2 of 3