Crate & Barrel Breck Table Lamp Assembly Instruction

BRECK TABLE LAMP

Thank you for purchasing the Breck Table Lamp. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

COMPONENTS

1 - finial

1 - standard type “A” bulb

150 max watt (socket can

also accept 3 way bulb

50/100/150 watt)

NOT INCLUDED

1 - lampshade

1 - harp1 - base unit

socket

base

1 - standard type “A” bulb

150 max watt (socket can

also accept 3 way bulb

50/100/150 watt)

NOT INCLUDED

1 Carefully remove all components from box and
remove all plastic coverings. Place base unit upright
onto clean, padded surface. Install 1 bulb (not
included) into socket.

harp

harp

saddle

saddle

2 Gently squeeze harp ends together and insert into the
saddle as shown.

Made in USA - r03 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

BRECK TABLE LAMP

A

lampshade

B

finial

harp

3 A) Place lampshade on the harp as shown.
B) Secure lampshade to harp with finial.

Assembly is now complete.

CLEANING & CARE

Do not use polishes or cleaners on your lamp. Dust
surfaces with a dry soft cloth.

IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Never use with an extension cord
unless plug can be fully inserted. Do not attempt to
override this safety feature.

Made in USA - r03 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com