Crate & Barrel Boulevard Cocoa Full Bed, Boulevard Cocoa King Bed, Boulevard Cocoa Queen Bed, Boulevard Sage King Bed, Boulevard Sage Full Bed Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD FULL, QUEEN, KING BED

Thank you for purchasing the Boulevard Bed. This page lists all the contents included in the box. Please take
time to identify the hardware as well as the individual components of this product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area to protect them from damage.

COMPONENTS

1 - center rail

1 - headboard

2 - side rails

1 - footboard

1 - support leg

2 - slat rolls

Made in Vietnam 2004

HARDWARE

8 - short
wood screws

1 - spring washer 1 - washer 8 - wood

2 - long
wood screws

1 - bolt

dowels

TOOLS REQUIRED

Phillips head screwdriver

Allen wrench (included)

A

B

1 A. With the assistance of another adult, insert 1 end of
the side rail into the corresponding slots on the headboard.
B. Lock assembly in place by pushing the side rail tabs
down into the holes in the headboard.
C. Repeat steps A & B for the other side rail.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BOULEVARD FULL, QUEEN, KING BED

2 Attach footboard to side rails using the same
method of assembly as the headboard in step 1.

Short
wood
screw

B

Dowel

A

x 2

4 A. Insert 4 wood dowels into holes in side rails.
B. Align holes on underside of slat roll with dowels and
fit into position. Secure with 4 short wood screws.
Repeat for remaining slat roll.

Made in Vietnam 2004

A

Bolt

Spring washer

Washer

Long wood

screw

B

3 A. Using allen wrench provided, attach center support leg to

center rail with bolt, spring washer and washer.

B. Fit center rail assembly into wood brackets on the head­board and footboard. Secure with 2 long wood screws.

5 Assembly is now complete.

CLEANING AND CARE

Clean wood surfaces with a damp cloth. Do not use
furniture wax or polish as the wood is finished with a
protective clear lacquer top coat.

Page 2 of 2