Crate & Barrel Boulevard Nightstand Assembly Instruction

BOULEVARD NIGHTSTAND

HARDWARE

Thank you for purchasing the Boulevard Nightstand.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

COMPONENTS

4 - short
bolts

12 - wood dowels 1 - drawer pull

Missing hardware? Please call 800.606.6387 for replacements.

4 - long
bolts

2- pull
screws

8 - shoulder
screws

TOOLS REQUIRED

Allen Wrench (included)

Phillips Head Screwdriver

1 - top panel 1 - shelf

1 - bottom frame 1 - drawer front

2 - side frames
(1 left, 1 right

1 - drawer back 2 - drawer sides

Made in Thailand r03 Page 1 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - back panel

1 - drawer bottom

(1 right, 1 left)

BOULEVARD NIGHTSTAND

NOTE:

Do not over tighten
the bolts

1 A) Place left side panel face down on a padded surface.
Insert 4 wood dowels into the bottom frame as shown.
B) Fit dowels of bottom frame into corresponding holes in left
side panel. Insert 2 long bolts through bottom frame and
secure with the allen wrench. Do not over tighten bolts.

2 Slide back panel into slot at rear of side panel.

3 Insert 4 wood dowels into shelf as shown, and fit into
corresponding holes in the side frame.

Made in Thailand r03 Page 2 of 3

Customer Service 800.967.6696 | www.crateandbarrel.com

4 Carefully align dowels in shelf and bottom frame with
corresponding holes in right side frame and fit into position.
Attach bottom frame with 2 long bolts and secure with the
allen wrench.