Crate & Barrel Bentwood Desk Chair Assembly Instruction

BENTWOOD DESK CHAIR

HARDWARE

TOOLS REQUIRED

Thank you for purchasing the Bentwood Desk Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

5 - spring
washers

Missing hardware?
Please call 800.606.6387 for replacements.

hex wrench (included)

COMPONENTS

1 - seat

1 - base 1 - gaslift

wheel

spring washer
NOTE: Do not over
tighten the wheels

5 - wheels

base

1 Place base upside down onto a clean, padded surface
as shown. Fit 5 spring washers and 5 wheels into
corresponding holes of base as shown. Secure, but do
not over tigthen, wheels with a hex wrench.

Made in Taiwan - r01 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

BENTWOOD DESK CHAIR

gas
lift

2 Fit bottom of gas lift into hole of base as shown.

seat

3 Fit top of gas lift into corresponding hole on the
bottom of the seat assembly as shown.

NOTE: Finalize assembly by sitting heavily on the chair
a few times. This will secure all the component
connections.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Made in Taiwan - r01 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com