Crate & Barrel Belmont Kitchen Cart Assembly Instruction

BELMONT KITCHEN CART

HARDWARE

Thank you for purchasing the Belmont Kitchen Cart.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

8 - cams

16 - small
screws

2 - casters 2 - lock

8 - cam
screws

18 - medium
screws

casters

2 - pull bolts

8 - large
screws

1 - pull

12 - bolts

4 - shelf pins

Missing hardware?
Please call 800.606.6387
for replacements.

TOOLS REQUIRED

phillips head screwdriver

( We recommend the use hand tools instead of power tools )

allen wrench (included)

1 - tabletop

1 - back panel

1 - drawer
front panel

Made in Thailand - r06 Page 1 of 6

2 - drawer
side panels

2 - side panels

(1 left, 1 right)

1 - top
crossbar

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - bottom
crossbar

1 - drawer
back panel

1 - top panel

1 - front
crossbar

1 - drawer
bottom panel

1 - bottom panel

1 - door front

4 - bar brackets

1 - shelf

2 - bars

4 - legs

BELMONT KITCHEN CART

NOTE: Do not over
tighten the cam screws

left and right
side panels

1 Insert 4 cam screws into left and right side panels as
shown. Secure, but do not over tighten, each cam screw
using a phillips head screwdriver.

top
crossbar

NOTE: Make sure each cam
points toward the nearest
edge with holes

bottom
crossbar

front
crossbar

2 Insert 2 cams into top crossbar, bottom crossbar and
front crossbar as shown. Make sure arrows on each cam
points toward the nearest edge with holes.

NOTE: Do not over
tighten the bolts

A

bar
bracket

bar

top panel

B

B

left and right
side panels

3 Insert 2 cams into top panel as shown.

Made in Thailand - r06 Page 2 of 6

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

4 A) Fit bar into corresponding holes of bar brackets as
shown.
B. Fit pre-assembled dowels of bar brackets into corre-
sponding holes of right side panel and secure with 1 bolt per
bracket. Repeat steps for left side panel.