Crate & Barrel Barcelona Five-Shelf Assembly Instruction
Customer Service 800-967-6696 | http://www.crateandbarrel.com
BARCELONA 5-SHELF ETAGERE
Thank you for purchasing the Barcelona 5 Tier
Shelf. This page lists all the contents included in the
box. Please take time to identify the hardware as
well as the individual components of this product.
As you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
COMPONENTS
Note these
holes
3 - top/center/
bottom shelves
2 - side
frames
2 - middle
shelves
5 - glass
shelves
Made in China - r05
HARDWARE
20 - rubber
20 - long
allen bolts
2 - optional wall
brackets
Missing hardware? Please call 800.606.6387 for replacements.
8 - short
allen bolts
2 - medium
screws
2 - allen
screws
bumpers
2 - plastic wall
anchors
TOOLS REQUIRED
Allen wrench (included)
Phillips head screwdriver
This middle
shelf has 2
A
holes on
the underside
B
1 A. Fit top, center and bottom shelves onto the pins at
the top, center and bottom of the left side frame. Loosely
attach with 2 long allen bolts per shelf. Do not fully tighten.
B. Attach 2 middle shelves with 2 long allen bolts per
shelf. Make sure to attach middle shelf with holes on the
underside where indicated. Do not fully tighten bolts.
Page 1 of 2
Customer Service 800-967-6696 | http://www.crateandbarrel.com
BARCELONA 5-SHELF ETAGERE
2 Attach right side frame to assembly with 10 long allen
bolts. Do not fully tighten bolts.
OPTIONAL WALL MOUNTING
INSTRUCTIONS:
If you wish to secure the shelf to
the wall, note that the hardware provided is
for mounting to drywall only. Make sure to
use hardware appropriate for your wall type.
4 Attach the 2 wall brackets to the underside of the
2nd shelf with 2 allen screws. Place frame in desired
location against the wall and mark the location of the
holes in each bracket. Insert 2 plastic wall anchors into
the wall as illustrated, and secure brackets to wall with 2
medium screws.
Made in China - r05
x 10
Drill hole in wall with
slightly smaller diameter
than plastic wall anchor
A
x 8
B
x 20
3 A. Insert 8 short allen bolts into the holes in the
underside of the top and bottom shelves.
B. Fully tighten 8 short allen bolts as well as the 20 long
allen bolts installed in Step 1 & 2 with the allen wrench.
B
A
5 Remove the adhesive backer off of each rubber bumper
and attach to frame as illustrated.
B. Fit 5 glass tops into the shelves, making sure each shelf
is firmly supported by the rubber bumpers.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive cleaners.
Page 2 of 2
Loading...