Crate & Barrel Balcony Wardrobe Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY WARDROBE BASE and TOP

Thank you for purchasing the Balcony Wardrobe. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - back frame

1 - left
side panel

1 - right
side panel

1 - bottom panel

1 - front frame

1 - large
drawer front

1 - large
drawer bottom

Made in Vietnam - r04

1 - small
drawer front

1 - small
drawer back

HARDWARE

22 - washers

20 - wood
screws

Missing hardware? Please call 800.606.6387 for
replacements.

18 - split
washers

4 -long
screws

18 - short
screws

4 - drawer
pulls

TOOLS REQUIRED

Phillips head screwdriver (included)

1 - top
panel

1 - large
drawer back

1 - small left
drawer side

1 - small right
drawer side

1 - shelf 4 - legs

1 - large left
drawer side

1 - small
drawer bottom

1 - large right
drawer side

Page 1 of 8

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY WARDROBE BASE and TOP

NOTE:

Do not over tighten
the screws.

x 4

1 Place back frame on padded surface as shown. Fit
right and left side panels into position and attach with 2
short screws, 2 split washers and 2 washers per panel.

Secure all screws with the phillips head screwdriver but
do not over tighten.

x 4

3 Fit front frame onto assembly. Secure from inside with 4
short screws, 4 split washers and 4 washers as shown.

Made in Vietnam - r04

2 Slide shelf into slot on the side panels and back frame.

x 6

4 Fit top panel into position and and attach with 6 short
screws, 6 split washers and 6 washers. Fully tighten each

screw with the screwdriver.

Page 2 of 4

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY WARDROBE BASE and TOP

5 Fit bottom panel onto assembly as shown. Secure
from below with 4 short screws, 4 split washers and 4
washers and fully tighten with the screwdriver.

Make sure
wheels on drawer
sides are at
the back

B

7 A. Attach large right and left drawer sides to large
drawer back with 3 wood screws per side. Do not over

tighten screws.
B. Slide large drawer bottom into groove at the base of the
drawer back and sides.
C. Fit large drawer front onto assembly and secure from the
sides with 6 wood screws.
D. Attach 2 drawer pulls with 2 long screws and 2
washers.

Made in Vietnam - r04

x 4

A

C

D

6 Attach 4 legs to underside of bottom panel by inserting
into the threaded holes as shown. Turn each leg clockwise
until secure.

Make sure
wheels on drawer
sides are at
the back

8 A. Attach small right and left drawer sides to small
drawer back with 2 wood screws per side. Do not over
tighten screws.
B. Slide small drawer bottom into groove at the base of the
drawer back and sides.
C. Fit small drawer front onto assembly and secure from
the sides with 4 wood screws.
D. Attach 2 drawer pulls with 2 long screws and 2
washers.

Page 3 of 4