Customer Service 800-967-6696 | http://www.crateandbarrel.com
BALCONY NIGHTSTAND
Thank you for purchasing the Balcony Nightstand. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
COMPONENTS
1 - back frame
1 - left side panel
1 - shelf1 - bottom panel 1 - front frame 1 - drawer bottom
1 - drawer back
Made in Vietnam - r05
1 - drawer front
HARDWARE
13 - washers
4 - long
wood screws
Missing hardware? Please call 800.606.6387 for
replacements.
12 - split
washers
8 - short
wood screws
12 - short
screws
1 - drawer
pull
TOOLS REQUIRED
Phillips head screwdriver (included)
1 - right side panel 1 - top panel
1 - right drawer side 1 - left drawer side
1 -long
screw
Page 1 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
BALCONY NIGHTSTAND
NOTE:
Do not over tighten
the screws.
1 Place back frame on padded surface as shown. Fit
right and left side panels into position and attach with 2
short screws, 2 split washers and 2 washers per panel.
Secure all screws with the phillips head screwdriver but
do not over tighten.
3 Fit notched corner of the shelf into corresponding
notches in the legs as shown. Secure with 1 long wood
screw per leg.
Made in Vietnam - r05
x 4
2 Slide bottom panel into slot at the bottom of the side
panels and back frame.
A
x 4
A
A
B
4 A. Fit front frame onto assembly, fitting dowels of side
panels into corresponding holes on front frame. Secure from
inside with 4 short screws, 4 split washers and 4 washers.
B. Attach shelf to legs with 2 long wood screws.
Page 2 of 3
Customer Service 800-967-6696 | http://www.crateandbarrel.com
BALCONY NIGHTSTAND
Front & Bottom panel
not shown
for clarity
x 4
5 Fit top panel into position and and attach with 4 short
screws, 4 split washers and 4 washers. Fully tighten each
screw with the screwdriver.
7 Insert drawer into case assembly, fitting the wheels of the
drawer glides into the glides on the side panels.
Assembly is now complete.
Made in Vietnam - r05
Make sure
wheels on drawer
sides are at the back
A
C
B
D
6 A. Attach right and left drawer sides to drawer back
with 2 wood screws per side. Do not over tighten screws.
B. Slide drawer bottom into groove at the base of the
drawer back and sides.
C. Fit drawer front onto assembly and secure from the sides
with 4 short wood screws.
D. Attach drawer pull with 1 long screw and 1 washer.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Page 3 of 3
Loading...