Crate & Barrel Balcony Five-Drawer Chest Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY 5 DRAWER CHEST

Thank you for purchasing the Balcony Dresser. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.

COMPONENTS

1 - back frame

1 - left side panel

1 - bottom panel3 - shelves

3 - large
drawer backs

3 - large left
drawer sides

3 - large right
drawer sides

2 - small left
drawer sides

Made in Vietnam - r05

2 - small right
drawer sides

2 - small
drawer bottoms

HARDWARE

38 - washers

8 -long
screw

Missing hardware? Please call 800.606.6387 for
replacements.

30 - split
washers

40 - wood
screws

30 - short
screws

8 - drawer
pull

TOOLS REQUIRED

Phillips head screwdriver (included)

1 - right side panel

1 - front frame 3 - large drawer fronts

3 - large
drawer bottoms

1 - drawer
divider

2 - small
drawer fronts

1 - top panel

4 - legs

2 - small
drawer backs

Page 1 of 4

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY 5 DRAWER CHEST

NOTE:

Do not over tighten
the screws.

x 8

1 Place back frame on padded surface as shown. Fit
right and left side panels into position and attach with 4
short screws, 4 split washers and 4 washers per panel.

Secure all screws with the phillips head screwdriver but
do not over tighten.

x 8

3 Fit front frame onto assembly. Secure from inside with 8
short screws, 8 split washers and 8 washers as shown.

Fully tighten each screw with the screwdriver.

Made in Vietnam - r05

B

A

2 A. Slide 3 shelves into slots on the side panels and back
frame.
B. Fit dowel of drawer divider into corresponding hole in
back panel.

x 8

4 A. Fit top panel into position and and attach with 8 short
screws, 8 split washers and 8 washers. Fully tighten each

screw with the screwdriver.

Page 2 of 4