Crate & Barrel Balcony Dining Table Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY 42" DINING TABLE

Thank you for purchasing the Balcony 42" Dining
Table. This page lists all the contents included in

the box. Please take time to identify the hardware
as well as the individual components of this product.
As you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
NOTE: 2 people are required to assembly this
product.

COMPONENTS

1 - glass top

1 - upper
leg frame

1 - top ring

Made in China - r03

1 - lower
leg frame

HARDWARE

5 - bolts

Missing hardware? Please call 800.606.6387 for
replacements.

4 - glass bumpers

TOOLS REQUIRED

Allen wrench (included)

1 Fit the upper leg frame onto the lower leg frame,
aligning holes at the center of each crossbar. Loosely attach
frames with 1 bolt at the center. Do not fully tighten the bolt.

Page 1 of 2

Customer Service 800-967-6696 | http://www.crateandbarrel.com

BALCONY 42" DINING TABLE

2 With the assistance of another adult, turn leg
assembly upside down and place on a padded surface.
Slide top ring over leg assembly and align holes in each
leg with corresponding holes in top ring. Loosely attach
each leg with 1 bolt. Make any necessary adjustments
to align the top tubes with the leg frames and fully
tighten all bolts with the allen wrench.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Use glass cleaner on top as necessary.

Made in China - r03

B

A

3 Turn leg assembly right side up.
A. Attach 1 glass bumper to the top of each leg.
B. With the assistance of another adult, center glass top on
leg frame.
Assembly is now complete.

Page 2 of 2