
AVALON ROUND EXTENSION DINING TABLE
HARDWARE
4 - brackets
Thank you for purchasing the Avalon Round Extension
Dining Table. This page lists all the contents included in
the box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
8 - bolts 8 - small
spring washers
4 - large
flat washers
Missing hardware? Please call 800.606.6387 for replacements.
12 - large
spring washers
8 - small
flat washers
12 - hex
nuts
TOOLS REQUIRED
hex wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
mounting
plate
threaded
stud
1 - tabletop
(leaf pre-attached)
1 - mounting
plate
Made in Vietnam - r03 Page 1 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
1 - pedestal
4 - legs
pedestal
1 Fit threaded studs of pedestal into corresponding holes
of mounting plate as shown.

AVALON ROUND EXTENSION DINING TABLE
NOTE: Do not
over tighten
the hex nuts
hex nut
large spring
washer
large flat
washer
3 With the assistance of another adult, position unit upside
2 Secure each threaded stud with 1 hex nut, 1 large
spring washer and 1 large flat washer as shown.
Secure, but do not over tighten, hex nuts with a hex
wrench.
down onto a clean, padded surface. Fit threaded bolt of each
leg into corresponding holes of pedestal. Secure each leg with
2 hex nuts, 2 large spring washers and 1 bracket as shown,
using a hex wrench.
hex nut
large spring washer
bracket
leg
bolt
small spring
washer
small flat
washer
tabletop
leg
assembly
4 With the assistance of another adult, position tabletop
face down as shown. Attach leg assembly to tabletop with
8 bolts, 8 small spring washers, and 8 small flat washers,
using a phillips head screwdriver. Carefully position unit
upright.
Assembly is now complete.
INSTRUCTIONS
TO RELEASE
VIEW FROM UNDERNEATH
TABLETOP
LEAF EXTENSION
• Turn clockwise
to lock
• Turn counter-
clockwise to unlock
90º
A
B
5 A) Locate 4 locking clasps underneath tabletop
assembly.
B) To unlatch, turn each handle 90º counter-clockwise. This
will release the tabletop sections.
Made in Vietnam - r03 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

AVALON ROUND EXTENSION DINING TABLE
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
6 With the assistance of another adult, slide the
tabletop sections apart. Carefully remove leaf and set
aside. Close tabletop sections and relatch locking
clasps.
Assembly is now complete.
Made in Vietnam - r03 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com