Crate & Barrel Avalon 36 Dining Group, Avalon 36 Dining Group Black, Avalon 36 Table Black, Avalon 36 Table Assembly Instruction

AVALON 36” ROUND DINING TABLE

HARDWARE

Thank you for purchasing the Avalon 36” Round Dining
Table. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the
individual components of this product. As you unpack and
prepare for assembly, place the contents on a carpeted or
padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

COMPONENTS

4 - plate

bolts

8 - small

flat washers

Missing hardware? Please call 800.606.6387 for replacements.

8 - tabletop

bolts

(2 - pre-attached)

8 - small

spring washers

2 - wood

dowels

12 - large
flat washers

8 - hex

nuts

12 - large

spring washers

TOOLS REQUIRED

small allen wrench
(included)

(We recommend the use of hand tools instead of power tools)

large allen wrench
(included)

hex wrench
(included)

1 - pedestal4 - legs

1 With the assistance of another adult, carefully place tabletop

1 - tabletop

(with top and bottom mounting

plate pre-assembled)

Made in Thailand - r02 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

onto a clean, padded surface. Using a large allen wrench,
remove 2 tabletop bolts, 2 spring washers and 2 flat
washers from the bottom mounting plate. Remove the bottom
mounting plate from tabletop. Set hardware aside.

AVALON 36” ROUND DINING TABLE

NOTE: Do not
over tighten
the bolts

A

B

wood dowel

plate bolt

large spring
washer

large flat
washer

B

bottom
mounting
plate

pedestal

2 A) Insert 2 wood dowels into pedestal as shown.
B) Fit dowels of pedestal into corresponding holes of

bottom mounting plate as shown. Attach bottom
mounting plate with 4 plate bolts, 4 spring washers

and 4 flat washers as shown. Secure, but do not over
tighten, bolts with a small allen wrench.

hex nut

spring washer

flat washer

leg

3 With the assistance of another adult, position unit
upside down onto a clean, padded surface as shown. Fit
threaded bolt of each leg into corresponding holes of
pedestal. Secure each leg with 2 hex nuts, 2 spring
washers and 2 flat washers, using a hex wrench.

tabletop
bolt

spring washer

flat washer

tabletop

leg assembly

4 With the assistance of another adult, position

tabletop face down as shown. Attach leg assembly to
tabletop with 8 tabletop bolts, 8 spring washers, and

8 flat washers, using a large allen wrench. Carefully
position unit upright. Assembly is now complete.

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.

Made in Thailand - r02 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com