Crate & Barrel Aspen Desk Organizer Assembly Instruction

ASPEN DESK ORGANIZER

HARDWARE

2 - screws

Missing hardware? Please call 800.606.6387
for replacements.

TOOLS REQUIRED

Phillips head screwdriver

Thank you for purchasing the Aspen Desk Organizer.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

1 Locate 2 metal connecting
plates on back of pre-assembled
hutch. Rotate each plate 90º as
shown, by aligning holes with
pilot hole on back of desktop
edge. Secure, but do not over
tighten, plates with 2 screws
using a Phillips head

screwdriver.

Assembly is now complete.

COMPONENTS

pre-assembled hutch

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

Made in Vietnam r03 Page 1 of 1

Customer Service 800.967.6696 | www.crateandbarrel.com