Crate & Barrel Aspen Desk Assembly Instruction
ASPEN DESK
HARDWARE
Thank you for purchasing the Aspen Desk. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
COMPONENTS
4 - barrel
nuts
8 - bolts 8 - flat
Missing hardware? Please call 800.606.6387 for replacements.
6 - cams
washers
6- cam
screws
8 - screw
nuts
8- spring
washers
TOOLS REQUIRED
Hex wrench (included)
Flathead screwdriver
(included)
NOTE: Make sure holes
B
on nut align with holes
on leg.
B
1 - table top
1 - long crossbar
A
2 - short crossbars
1 A) Insert 2 cam screws into each left and right
2 - back
1 - front
left leg
Made in Vietnam r07 Page 1 of 2
1 - front
right leg
Customer Service 800.967.6696 | www.crateandbarrel.com
legs
(1 left,
1 right)
back leg and 1 cam screw into each left and right
front leg as shown. Secure with a flathead
screwdriver, but do not over tighten.
B) Insert 1 barrrel nut and 2 bolts into each leg as
shown. Use a flathead screwdriver to align holes on
nut with holes on leg. Turn bolts clockwise to secure.
back right
and left legs
front
right leg
front
left leg
ASPEN DESK
back
A
right leg
front
right leg
front
left leg
B
back
left leg
A
front of
desk
2 A) With the assistance of another adult, carefully
place tabletop face down on padded surface. Loosely
attach each corresponding leg onto tabletop as shown.
B) Insert 2 flat washers, 2 spring washers, and 2 screw
nuts per leg as shown. Do not fully tighten hardware.
short crossbar
A
Make sure arrow
on each cam point
towards edge
with holes.
A
long crossbar
B
3 A) Insert 2 cams into each short and long
crossbar. Make sure arrow on each cam point
towards edge with holes.
B) Fit 2 short and 1 long crossbars onto assembled
unit by aligning corresponding cam screws and wood
dowels.
A
B
B
5 With the assistance of another adult, carefully
place desk upright. Assembly is now complete.
4 A) Secure all cams with a flathead screwdriver.
Turn clockwise until each cam securely engages each
cam screw.
B) Fully tighten screw nuts on each leg as shown with
a hex wrench.
Made in Vietnam r07 Page 2 of 2
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
Loading...