Crate & Barrel Archetype 3 or 4 Ledge Assembly Instruction

ARCHETYPE 3’ AND 4’ WALL LEDGES

HARDWARE

Thank you for purchasing the Archetype Wall
Ledge. This page lists all the contents included in

the box. Please take time to identify the hardware
as well as the individual components of this
product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.

TOOLS REQUIRED

Phillips head screwdriver

Drill & 3/16" diameter drill bit

B

A

C

D

E

3 - drywall anchors

1 - wall template

Missing hardware? Please call 800.606.6387 for
replacements.

3 - screws

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.

WALL MOUNTING INSTRUCTIONS:

The wall mounting hardware included with this shelf is
intended for drywall installation only. Be sure to use
hardware appropriate for your wall type. Whenever
possible, fasten screws directly into a wall stud.
If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or
your local hardware store.

1 A. Determine wall mounting location. Tape wall template
into position making sure all holes are level.
B. If attaching directly to a wall stud, do not use the wall
anchors. Fasten each screw directly into the stud.
C. Drill a 3/16"dia hole at each end of the template where
indicated.
D. Remove wall template and insert a phillips head
screwdriver into the wall anchor and insert into the holes while
turning each anchor clockwise. Fully tighten until the anchor is
seated flush with the surface of the wall.
E. With a screwdriver, insert the screw into the hole of the
anchor. Leave 3/16" of the screw protruding out from the
surface of the wall.
F. Carefully align keyhole hardware on back side of the shelf with
the protruding screws in the wall and fit securely into place.
Installation is now complete.

Made in China - r02

Page 1 of 1