Crate & Barrel Arbor Side Table Assembly Instruction

ARBOR SIDE TABLE

HARDWARE

Thank you for purchasing the Arbor Side Table. This
page

lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

to this product. As you unpack

COMPONENTS

4 - hex
nuts

Missing hardware?
Please call 800.606.6387 for replacements.

4 - flat
washers

TOOLS REQUIRED

hex wrench

4 - spring
washers

1 - top panel

1

With the assistance of another adult, carefully lay top

4 - legs

Customer Service 800.967.6696 | Latest instructions availalbe at www.crateandbarrel.comMade in Bolivia - r03 Page 1 of 2

panel face down on padded surface.

ARBOR SIDE TABLE

2

Insert 4 legs to under side of top panel, fitting
bolt of each leg into corner blocks of top panel.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend
the use of outdoor furniture covers during inclement
weather.

Treat with Crate and Barrel’s Roble Protector or
allow the finish to weather to a silver gray.

3

Attach each leg with 1 flat washer, 1 spring washer
and 1 nut. Secure each leg by turning all nuts
clockwise with the hex wrench.
Assembly is now complete.

Made in Bolivia - r03

Customer Service 800.967.6696 | Latest instructions availalbe at www.crateandbarrel.com

Page 2 of 2