Crate & Barrel Arbor Round Dining Table Assembly Instruction

ARBOR ROUND DINING TABLE

HARDWARE

Thank you for purchasing the Arbor Round Dining Table.
This page lists all the contents included in the box. Please
take time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ASSEMBLY

nut

spring washer

flat washer

4 - spring
washers

Missing hardware?
Please call 800.606.6387 for replacements.

4 - flat
washers

4 - nuts

TOOLS REQUIRED

1 - hex wrench (not included)

1 With the assistance of another adult,
place tabletop onto a clean, padded
surface as shown. Fit threaded bolt of
each leg into corresponding hole of

tabletop. Secure each leg with 1 spring
washer, 1 flat washer and 1 nut as

shown, using a hex wrench. Do not over
tighten the bolts.

1 - umbrella
cap

leg

threaded
bolt

Made in Bolivia - r07 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

tabletop

ARBOR ROUND DINING TABLE

umbrella cap

2 Position unit upright. Fit 1 umbrella
cap into corresponding hole of tabletop.

Assembly is now complete.

Made in Bolivia - r07

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend
the use of outdoor furniture covers during inclement
weather.

Treat with Crate and Barrel’s Roble Protector or
allow the finish to weather to a silver gray.

Customer Service 800.967.6696 | Latest instructions availalbe at www.crateandbarrel.com

Page 2 of 2