Crate & Barrel ARBOR RECTANGULAR DINING TABLE Assembly Instruction
ARBOR RECTANGULAR DINING TABLE
HARDWARE
Thank you for purchasing the Arbor Rectangular
Dining Table. This page
in the box. Please take the time to identify the hardware
as well as the individual components
As you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included
to this product.
COMPONENTS
4 - hex nuts
(pre-attached)
1 - umbrella
cap
4 - flat washers
(pre-attached)
Missing hardware?
Please call 800.606.6387 for replacements.
TOOLS REQUIRED
hex wrench
4 - spring washers
(pre-attached)
Made in Bolivia - r07
1 - tabletop
4 - legs
Customer Service 800.967.6696 | Latest instructions availalbe at www.crateandbarrel.com
1
With the assistance of another adult, carefully lay
tabletop upside down onto a clean, padded surface.
Page 1 of 2
ARBOR RECTANGULAR DINING TABLE
NOTE: Fit each numbered leg
into corresponding number
on table top
2
Using a hex wrench, remove pre-assembled 1
flat washer, 1 spring washer and 1 hex nut from
each leg. Fit threaded stud of each leg into
corresponding hole of tabletop as shown. Make
sure to fit each numbered leg into corresponding
number on table top
3
Attach each leg with 1 flat washer, 1 spring washer
and 1 hex nut. Secure, but do not over tighten, hex
nuts with an hex wrench.
4
With the assistance of another adult, position unit
upright. If not using an umbrella, conceal hole
with the umbrella cap as shown.
Assembly is now complete.
Made in Bolivia - r07
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend
the use of outdoor furniture covers during inclement
weather.
Treat with Crate and Barrel’s Roble Protector or
allow the finish to weather to a silver gray.
Customer Service 800.967.6696 | Latest instructions availalbe at www.crateandbarrel.com
Page 2 of 2
Loading...