Crate & Barrel Arbor Ottoman Assembly Instruction

ARBOR OTTOMAN

HARDWARE

Thank you for purchasing the Arbor Ottoman This
page

lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.

to this product. As you unpack

COMPONENTS

4 - bolts

Missing hardware?
Please call 800.606.6387 for replacements.

TOOLS REQUIRED

2 - allen wrenches
(included)

4 - bolt
caps

1 - top panel

2 - leg
frames

Made in Bolivia - r05 Page 1 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

ARBOR OTTOMAN

A) Position top panel upside down onto a clean,

1

padded surface as shown. Fit notch of each leg

into corresponding corner of top panel as

shown.

B) Attach each leg with 1 bolt and 1 bolt cap.

With 1 allen wrench, hold cap and fully tighten

large bolt with remaining allen wrench. Position

unit upright.

Assembly is now complete.

bolt

A

leg

notch

B

top panel

cap

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.

Treat with Crate & Barrel's Roble Protector
or allow the finish to weather to a silvery gray.

B

Made in Bolivia - r05 Page 2 of 2

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com